Fields of application

  Crop protection in closed rooms (greenhouses: e.g. vegetables, ornamental plants, etc.) and outdoors
(e.g. cocoa plantations)

  Stocks are also attacked and sometimes completely destroyed (foodstuffs, tobacco, cotton, etc.)

Other pest transmit diseases, which is why fogging is carried out for vector control

  to stop the spread of epidemics (e.g. to combat DHF or malaria mosquitos)

  to disinfect stables in animal husbandry

The devices can also be used

  to inhibit potato germination

  to produce special effects for the film industry, dense fog, etc.!

The use of environmentally-compatible technologies in the field of crop protection and parasite control is becoming increasingly important in view
of current ecological problems. IGEBA's years of practical experience open
up a whole new dimension in this field. IGEBA technology helps to prevent environmental damages with minimum application quantities per surface area. IGEBA thermal fog generators can be used both indoors and outdoors to produce a dense insecticidal fog. This takes immediate action with the right active ingredient and destroys both flying and crawling insects. In suitable weather conditions outdoors the fog effectively passes through an affected area with a minimum of environmental contamination. This enables an immediate control over fly + insect nuisances. Indoors, the IGEBA TF 95 HD, for example, can be used to treat large warehouses or similar large halls where fast and economic action has to be taken. Our new TF 35 is the logical improvement to the TF 30, over 20,000 of which have already been sold, and at the same time our smallest thermal fog generator. The successor thus sets even higher quality standards. This is symptomatic for our complete range of products. Only the best materials are used. The tank and rigid lines are made of stainless steel, guaranteeing long operational reliability. Teflon and Viton round off the high-quality appearance. We still manufacture by hand so that every stage of production is checked in the subsequent stage. None of our devices leaves our works without a final inspection.

Our thermal fog generators can practically be supplied according to your requirement. So-called "W-designs" have been specially designed to fog pesticides diluted in water, e.g. fungicides. You can order a device with either a 5 l or a 60 l tank (and special units can be connected to any size solution tanks). The output varies between 8 and 160 l/h. A remote control can be ordered for the larger devices, making such appliances ideal for mounting on flatbed trucks for operation from the cab. We can also offer an automatic cut-off device and a finger-tip control.

Mode of operation

The Fog Generator operates on the principle of the one-sided open jet-tube (Schmidt-Argus-Tube) with a valve at the inlet side (carburetor) and an open outlet (fog outlet). This system - operating without any moving parts - with carburetor, mixer tube, combustion chamber and resonator constitutes an acoustical oscillation system at a certain frequency. This Fog Generator
works at an operating frequency of about 100 cycles/second.                    

Liquids (chemical formulations, oil, etc.) can be fed into the pulsating gas stream of the resonator at the outlet end. The high frequency of the gas allows the application and break up of solutions, otherwise susceptible to combustion or decomposition,
due to the very short time they are exposed to the hot gas stream.

MADE IN GERMANY